Vertex Guitar Pedal Buffer Interface

Description

Clean Up Your Sound – The Vertex Guitar Pedal Buffer Interface

For over a decade, every buffer that’s come out of Vertex Effects has been custom made, bespoke, for the pedalboard it was designed for or the customer that ordered it. Needless to say, Vertex buffers were very limited, with only a few hundred made over the last ten years. Over that time, and through hundreds of custom buffer interfaces being made, several common applications for buffer combinations and routing emerged as the most common uses as it comes to placing buffers on a pedalboard for the most optimal results. Routing schemes such as mono, stereo, audition loops (inserts), four-cable method, five-cable method, and wet/dry/wet were all common requests from Vertex customers, but there was never an all-in-one solution that provided all of these options for buffering and routing your pedalboard in a pedalboard-friendly enclosure – until now.

• Mono
• Split Mono
• Stereo
• Four Cable Method (amp with effects loop)
• Five Cable Method (stereo amps with effects loops)
• Wet/Dry
• Wet/Dry/Wet
• Audition Loop (insert)
• Passive Input (for Fuzz)

Introducing the Vertex Buffer Interfaces and Buffer Modules. The first all-in-one solution that covers 99% of all pedalboard routing options, whether you have multiple amps, amps with effects loop, a wet/dry/wet rig, an impedance sensitive fuzz, or want to side-chain pedals off the board in the middle of your signal path with an insert loop, these boxes have a solution for you that won’t compromise on tone.

Why are Vertex Buffers Better?

Firstly, Vertex buffers are designed to have no sound of their own – totally transparent, no color, no EQ, no distortion – just your tone as though you plugged your guitar directly into your amp with a 10ft cable (even if you’re running a dozen or more pedals between the guitar and amp with over 100ft. of cable). So often buffers in the industry will be described by the manufacturers with words like “warm” or “fat” when really the buffer should NOT be imparting anything to the sound other than 1) loading the guitar pickups properly with the same loading as your guitar would see if plugged into a tube amp and 2) converting the signal to low impedance, driving the line so it is the least susceptible to environmental factors that might alter the tone. Unfortunately, 99% of the buffers available on the market don’t do this – they add a color to the signal and lack the proper specifications to drive even 20 feet of cable without introducing artifacts into the sound.

Vertex buffers are built to the highest standards with the proper specifications for guitar signals: 1M ohms input impedance, 100 ohm output impedance (10x lower than the industry standard of 1K ohms), the lowest possible noise, and the highest possible headroom (running 12V rail to rail or essentially ~24V internally). Beyond that, Vertex custom made their own isolation transformer, providing players total galvanic isolation for their multi-amp set-ups, with the highest amount of transparency (most transformers significantly color the tone, and often are input transformers designed to be next to your amp’s input, not the output of the pedalboard), while rejecting the maximum amount of hum caused by ground loops that may be present in your rig. Additionally, the Vertex Buffer Interface provide a polarity switch for the transformer that allows you to correct any phase issues that might occur when running multiple amps at the same time.

SPECIFICATIONS

• Input Impedance: 1M ohms
• Output Impedance: 80 ohms
• DC Input Voltage Range: 5.5V-30V (150mA)
• Number of Buffers: 4 (Input, Amp L Out, Amp R Out, Return)
• Isolated Output: Yes (transformer-based isolation on AMP R output)
• Polarity Switch: Yes (on AMP R output)
• Dimensions: 5.0″ (L) x 3.0″ (W) x 1.33″ (H)

Manufacturer:Vertex
Model:11528247
SKU:I727206-N-1-WHXA
UPC: 749350578400

We are Chuck Levin’s Washington Music Center

Maryland, Virginia, and Washington DC’s legendary music shop. Family-owned and operated since 1958. Buy gear the way it was meant to be bought, from a store that’s been there through it all and has the vibe to prove it. We’re staffed with musicians and industry experts, people that live and breathe music gear. Our mission is to help you find the right gear for your project, that thing that will bring you the most joy out of what you do. We’re an authorized dealer for almost every brand, we stock items the other stores don’t, so you can try before you buy. Stop by our Wheaton, MD showroom and see for yourself.

Contact us if you have questions about one of our listings or if you need help finding the right piece of gear.