Mordax DATA Multi-function Utility Eurorack Module – Black

Description

Unlimited Possibilities – The Mordax Data Multifunction Utility Eurorack Module – Black

The DATA is a digital platform for testing, measurement, and signal generation in Eurorack modular synthesis systems. It is a modular tool kit, with functions applicable to any system and style.

Use the DATAs scope to view the interactions between your control voltages and audio signals, allowing you to master your modules by understanding their voltage ranges, control shapes, and parameter responses. Use the DATAs dual waveform generator to dial in a precisely scaled LFO for CV control, or use the waveforms frequency note mode to effortlessly make dyads (two note chords). Use the DATAs clock program as a master clock or to divide or multiply an incoming clock signal, sending four different clock outs to gate modules directly or as control to sequencers.

The possibilities of the DATA are basically unlimited; with the included microSD you can update the DATAs firmware and we can continue to refine and create new programs.

4 Channel Oscilloscope

• Monitor four independent CV or audio channels
• Selectable voltage scale, position, AC/DC coupling, and visibility
• Trigger from any channel, with full scale, user-selectable trigger level
• Time scale ranges from 50S to 5 seconds per grid square (total range of 600S to 1 minute of signal across the screen)
• X (time) and Y (voltage) measurement cursors with difference display, allowing for simple measurement and windowing of any input signal
• NEW in Firmware V01.01.00: XY Scope (Lissajous curves) and Minimal Display Mode

Tuner

• Measure the precise frequency of any of the 4 incoming signals with a large frequency display
• The tuning display shows your distance from the closest note graphically and as a frequency number
• Nearest note is automatically detected and changes while you tune

Voltage Monitor with Quad Voltage & Gate Source

• 4 channel input display with real-time voltage readout, a simple CV scope for low frequency signals
• 4 channel outputs can be CV sources (constant voltages, from +10V to -5V) or manual gate sources, with user defined gate HIGH and gate LOW voltages, with either momentary gate or latched gate behavior.

Dual Waveform Generator

• Two independent digital oscillator channels, with control over frequency, phase, amplitude and offset (wave center)
• Current waveforms: sine, square, saw, triangle, with waveform output display per channel
• Frequency range: > 4kHz down to 0.01Hz, selected per numeral for quick, precise value input
• Note Mode frequency selection available independently for either oscillator
• CV assignable control over frequency (1V/Octave – over 8 octaves!) and amplitude (digital VCA)
• Flexible CV control routing; any of the four input jacks can be freely assigned to any destination, with per destination attenuation (percent value)
• NEW in Firmware V01.01.00: Wavefolding Mode

Quad Clock Source with Clock Division, Multiplication & Offset

• External Sync or Internal Clock modes; use it as a precise and stable master clock, or as a clock processor syncd to an external clock source
• Quad clock outputs, each can be a ratio of the main clock (internal/external), with 32 different div/mult values available, from /48 (12 measures) up to x48 (128th note triplets), including fractional factors (e.g., x1.3 = dotted 8th note)
• Beat offset shift for each clock pulse, +/- 96 steps (up to one 4th note shift either direction)
• Input jacks 1 & 2 act as Ext Clock Sync and Reset inputs while in External Sync mode and as Start/Stop and Reset while in Internal Clock mode
• Input jacks 3 & 4 are user-assignable CV input sources, which can be assigned to control any of the 4 output channel’s div/mult values and offsets, with selectable attenuation per destination
• NEW in Firmware V01.02.02: Clock upgraded from 2ch to 4ch clock output, new core, more div/mult values

Spectral Analyzer (single-FFT)

• Display the current harmonic content of any of the 4 incoming signals
• User-selectable filter window (Square/None, Hann, Bartlett, Blackman-Harris)
• Peak frequency bin readout shows you frequency range of the first harmonic (fundamental frequency) in the signal

Spectrograph (multi-FFT)

• Display the harmonic content of any of the 4 incoming signals over time
• Each column of pixels along the X axis is one frame of the Spectral Analyzers display.
• User-selectable filter window (Square/None, Hann, Bartlett, Blackman-Harris)
• Controls for display clear and run/stop

SPECIFICATIONS

General

• 16 HP (81.28mm width)
• 35mm approx. depth
• Full color, 2.8 (71mm) display, with crystal clear, scratch resistant window
• User upgradable firmware via included microSD card
• Oscilloscope, tuner, waveform generator, clock source/div/multi, spectral display, and more

Input/Output

• 4 input jacks (+/-10V range), AC or DC coupled via on-screen control
• 4 buffered through jacks, one for each input channel
• 4 output jacks (+10 to -5V range), can be CV, audio, trigger or gate signals

Power Consumption (average)

• ~250mA +12V
• ~60mA -12V

Manufacturer:Mordax
Model:DATA_BK
SKU:I605769-N-0-WHXA

We are Chuck Levin’s Washington Music Center

Maryland, Virginia, and Washington DC’s legendary music shop. Family-owned and operated since 1958. Buy gear the way it was meant to be bought, from a store that’s been there through it all and has the vibe to prove it. We’re staffed with musicians and industry experts, people that live and breathe music gear. Our mission is to help you find the right gear for your project, that thing that will bring you the most joy out of what you do. We’re an authorized dealer for almost every brand, we stock items the other stores don’t, so you can try before you buy. Stop by our Wheaton, MD showroom and see for yourself.

Contact us if you have questions about one of our listings or if you need help finding the right piece of gear.